BUILT IN THE USA. READY FOR YOUR PROJECT.
Airports Switchgear
Airport power distribution has to support two very different environments: occupied terminals with changing passenger demand and airfield systems whose availability affects flight operations.
DIRECT FROM THE MANUFACTURER / NEW EQUIPMENT

THE MANUFACTURER’S PERSPECTIVE — 02
Airport power distribution has to support two very different environments: occupied terminals with changing passenger demand and airfield systems whose availability affects flight operations. New switchgear must fit both the electrical design and the airport’s construction plan. Owners and engineers can reduce procurement uncertainty by defining source interfaces, standby priorities and outage constraints before requesting a manufacturer’s proposal.
Map terminal and airfield connections
Start with a current one-line diagram showing incoming services, distribution points and feeder destinations. Terminal loads may include baggage handling, gates, elevators, concessions and ventilation. Identify tenant boundaries and separate metering requirements, because a lineup that supplies multiple occupants needs a clear allocation of feeders and responsibilities.
Airfield circuits can serve lighting, navigation or other operational systems at locations remote from the terminal. Describe where the new assembly connects to each system, including any lighting regulators, controls and communications. Airport operators and the relevant authorities should identify applicable aviation requirements; do not assume a terminal distribution specification covers every airfield interface.
Establish electrical duty and coordination
Provide the system voltage and configuration, expected demand, feeder schedule and available fault-current information at the proposed connection. Include the utility contribution and any on-site generation assumptions supplied by the responsible engineer. These inputs affect the selection and rating of the assembly, bus and protective devices, not simply the size of its enclosure.
The engineer should compare protective-device settings and clearing characteristics across upstream and downstream equipment. Better selectivity can confine a fault’s impact, but the desired coordination must be checked against equipment duty and project requirements. Share existing studies and identify who will update them as the design and utility information become final.
Define standby power behavior
A generator connection alone does not establish which airport loads remain available during an outage. Provide a priority list, allowable interruption periods and the normal and alternate source arrangement. Distinguish loads supplied through transfer equipment from systems that also rely on uninterruptible power, such as selected communications or operational controls.
Agree on transfer sequences, load shedding, generator capacity and any staged motor starting with the design team and generator supplier. Large baggage or ventilation loads can affect the alternate source differently from their steady demand. The engineer should also resolve neutral and grounding arrangements, control signals and the boundary between the switchgear and transfer equipment.
Fit the assembly to the site
Document the electrical room or outdoor location, equipment footprint, cable entry, available working space and path from receiving to the installation point. Terminal renovations may have narrow delivery routes, while airfield locations can expose equipment to heat, moisture or wind-driven rain. An enclosure and ventilation strategy should follow the actual site conditions.
Coordinate civil supports, drainage where relevant, conduit locations and access for future inspection before finalizing drawings. Extra feeder space may support gate expansion, but spare capacity has footprint and budget consequences. Confirm applicable assembly standards and any required listing for the specific proposed construction rather than assuming one designation fits every switchgear type.
Plan construction around airport operations
Divide the project into defined installation and cutover phases, with an owner-approved list of affected loads for each outage. The plan may involve installing a new lineup while a terminal remains occupied, then transferring selected feeders during agreed windows. Temporary power, where needed, requires its own engineered scope and operating approvals.
Coordinate access and scheduling with airport operations, tenants, the electrical contractor and any agencies responsible for affected systems. Establish decision points, outage notifications, contingency arrangements and authority to return equipment to service. Qualified electrical personnel must perform site work under the facility’s safety procedures; the equipment purchase does not replace that planning.
Purchase against a complete deliverable list
Send the direct American manufacturer the one-line, load and fault data, site constraints, desired delivery sequence and applicable specifications. State whether the request covers a complete lineup, metering, controls or interfaces to separately furnished equipment. For projects in San Antonio, South Texas or elsewhere, confirm scope and shipping responsibilities rather than assuming a local facility.
Compare proposals by drawings, component schedules, inspection and factory test plans, documentation and clearly stated exclusions as well as price. Reserve time for submittal review, revisions, fabrication, delivery and field acceptance. Define who witnesses required checks and who coordinates integrated transfer testing, so the airport receives records that match its approved design.
LET'S BUILD SOMETHING RELIABLE — 03
Ready to talk
switchgear?
Tell us about the new equipment your project needs. Include as much or as little detail as you have today.
(951) 403-5738CALL TO DISCUSS YOUR PROJECT