BUILT IN THE USA. READY FOR YOUR PROJECT.
Revenue Metering Interfaces
Revenue metering is the interface between an electrical service and the utility’s billing system; facility monitoring answers a different set of operating questions.
DIRECT FROM THE MANUFACTURER / NEW EQUIPMENT

THE MANUFACTURER’S PERSPECTIVE — 02
Revenue metering is the interface between an electrical service and the utility’s billing system; facility monitoring answers a different set of operating questions. For a new switchgear or switchboard project, the two functions can influence enclosure layout, instrument transformer selection, access and approvals. Owners, specifying engineers and contractors should establish the utility’s requirements before fixing the assembly footprint or procurement schedule.
Separate billing from facility monitoring
The serving utility determines its revenue-metering requirements and may supply, own, approve or control particular devices and compartments. Ownership and installation responsibilities differ by utility and service arrangement. Ask where the billing meter and associated instrument transformers belong, who supplies each item, and which parts require utility access or sealing.
A customer meter may track demand, energy use, power quality or individual tenants and processes without being the billing meter. Do not assume it can share the utility’s instrument transformer circuits or enclosure. The utility must approve any proposed sharing; separate sensing and wiring may offer clearer control of accuracy, access and maintenance responsibilities.
Collect the service and metering inputs
Give the manufacturer the current one-line diagram, service location and serving utility, system voltage and configuration, expected service demand, available fault-current information and service equipment specification. Include the utility’s written metering requirements, approved diagrams and any application-specific conditions. Identify whether the metering point is at the service or elsewhere in the distribution system.
The utility and engineer should establish the required metering arrangement, including applicable current and voltage transformer ratios, accuracy and burden requirements, along with meter and test provisions. Actual equipment ratings and availability need engineering review. A billing configuration cannot be inferred reliably from the main device’s continuous-current rating alone.
Make room for the utility interface
Metering equipment competes for space with incoming conductors, bus, protective devices and working access. Drawings should show the meter location, transformer mounting provisions, wiring pathways, terminal locations, barriers and any required sealable compartments. Also coordinate conductor entry, cable bending space and the route by which utility personnel can reach their equipment.
A compact lineup can be attractive when the electrical room is tight, but utility access or mandated separation may require additional space. Confirm clearances and service access with the design team and utility rather than assuming a standard arrangement will fit. Outdoor installations add enclosure exposure, mounting and weather-protected access to the review.
Specify monitoring without compromising billing
For customer monitoring, define the quantities to be measured, intended accuracy, sampling or reporting needs, and the circuits to be observed. A main meter can show facility demand, while feeder meters may reveal where consumption is changing. Additional points require more devices, wiring and panel space, so connect each measurement to an actual operating decision.
Identify communication protocol, network handoff, addressing responsibility, point list and cybersecurity expectations in the specification. Distinguish equipment furnished in the assembly from customer network switches, cabling and software. Meter data availability depends on the approved design and integration; it should not be assumed that the utility’s billing system provides a usable customer feed.
Resolve approvals and scope before release
An actionable quotation should state the equipment boundary: meter sockets or cabinets, transformer provisions, monitoring devices, factory wiring and any utility-furnished components. Identify installation, field wiring, inspection and meter installation responsibilities separately. If US-made components are specified, document the origin requirement and confirm component availability and sourcing for the actual project.
Review the proposed one-line, elevations, metering details, device schedules and exceptions against the utility’s current requirements. For an applicable switchboard, verify any required UL 891 listing and its scope for the proposed configuration; a listing is not a substitute for utility acceptance. Record unresolved approvals and prohibit substitutions without the designated reviewers’ consent.
Plan the handoff and energization dependencies
Utility review, instrument transformer information and approval of shop drawings can affect fabrication and delivery sequencing. Build the schedule around documented decisions, the availability of utility-supplied items, inspection appointments and the contractor’s installation window. A proposed ship date is not the same as an approved service date; track each dependency and update the team when it changes.
At turnover, request the approved drawings, equipment and wiring documentation, applicable factory inspection records, manuals and a clear list of remaining field checks. The owner and contractor coordinate utility inspection and authorization. Qualified electrical personnel perform installation, testing and commissioning under applicable site procedures and manufacturer instructions; final acceptance and energization remain subject to the responsible parties’ requirements.
LET'S BUILD SOMETHING RELIABLE — 03
Ready to talk
switchgear?
Tell us about the new equipment your project needs. Include as much or as little detail as you have today.
(951) 403-5738CALL TO DISCUSS YOUR PROJECT