AMERICAN-BUILT POWER DISTRIBUTIONSAN ANTONIO & SOUTH TEXAS / NATIONWIDE SHIPPING

BUILT IN THE USA. READY FOR YOUR PROJECT.

Infrared Inspection of Electrical Equipment

Infrared inspection can reveal an unusual thermal pattern before a distribution problem becomes an outage, but an image is evidence to investigate, not a diagnosis.

DIRECT FROM THE MANUFACTURER / NEW EQUIPMENT

Gray electrical switchgear cabinets with open doors on wooden pallets.
01 / POWER DISTRIBUTIONBUILT FOR THE JOB
Representative switchgear photography.
✦MADE IN THE USAAmerican components
▦UL 891Switchboards when specified
↗BUILT TO SPECProject-specific engineering
→NATIONWIDEShipping across the USA

THE MANUFACTURER’S PERSPECTIVE — 02

Infrared inspection can reveal an unusual thermal pattern before a distribution problem becomes an outage, but an image is evidence to investigate, not a diagnosis. Facility owners, contractors and specifying engineers get more value when they define the inspection boundaries, operating conditions and reporting needs in advance. Results can also inform the specification of a newly manufactured switchgear assembly when a broader project is warranted.

Define a useful inspection scope

Start with an equipment list, current one-line diagram and the owner’s critical-load priorities. Identify which lineups, accessible viewing locations and operating modes matter, as well as any known loading changes or previous findings. Agree on who provides current drawings, site access, a qualified thermographer and electrical supervision; the imaging firm and equipment manufacturer need not be the same party.

Choose a time when normal, representative loads can be documented, while recognizing that process cycles and seasonal demand can change what the camera sees. An inspection at light load may miss a connection that heats under heavier demand. Schedule around operating constraints and record exceptions rather than treating an incomplete survey as comprehensive.

Put safety and access ahead of the image

The site’s electrical safety program governs the work. Qualified personnel must assess the task, authorization, access boundaries and protective measures under applicable rules and equipment instructions. Opening electrical enclosures or exposing energized parts can introduce serious hazards; an image is not a reason to bypass normal isolation, approval or protective requirements.

Where permitted and suitable, viewing through a closed enclosure’s approved infrared window may limit the need for exposed access. The window still has a defined field of view and transmission characteristics, and it may not show the relevant connection. If an area cannot be inspected safely, document it as a limitation and agree on an alternative assessment.

Read the thermal picture in context

A warm region can result from load, ambient heat, cooling conditions or a connection problem; temperature alone does not identify the cause. Compare similar components under reasonably comparable loading and record phase currents or other operating data when available. An unbalanced load can make a legitimate phase difference look like a defective connection.

Camera settings, surface emissivity, reflected heat, distance and the transmission of an infrared window can affect apparent temperature. Shiny metal is particularly easy to misinterpret. The inspector should document measurement assumptions and conditions, while the qualified reviewer avoids treating a single image or a universal temperature cutoff as a definitive pass or failure.

Ask for a report that supports decisions

Specify a deliverable that identifies each surveyed asset and location, inspection date, operating conditions, camera assumptions and any inaccessible areas. Pair thermal images with corresponding visible images when practical, and mark the area of concern clearly. Prior records should remain traceable to the same equipment and comparable conditions so trends are meaningful.

For each finding, request an observed pattern, relevant load information, an assessment of uncertainty and a recommended review priority. The owner and qualified electrical personnel determine urgency using equipment instructions, criticality and site procedures. A report should distinguish observed evidence from a suspected cause and identify who is responsible for follow-up.

Plan follow-up without overreading a scan

An abnormal image may justify an engineering review, further testing or a planned outage for closer examination. Qualified personnel decide the appropriate next step and manage the work under the facility’s safety procedures. A follow-up image under comparable conditions can help document a change, but it does not independently prove that every internal condition is acceptable.

Thermography cannot see through a closed metal cover or reliably detect every internal defect. Low load, blocked sight lines and reflections can hide or distort evidence. Combine inspection findings with maintenance records, equipment condition, protective-device information and operating history rather than using a clean scan as a substitute for a broader assessment.

Use findings when specifying new equipment

If the assessment supports a new replacement lineup, share relevant findings with the direct manufacturer alongside the one-line, load schedule, available fault information, site dimensions and installation constraints. Distinguish the thermal concern from the proposed remedy: a hot location may prompt questions about loading, connections or ventilation, each requiring project-specific engineering review.

Discuss access and future inspection requirements during drawing review, including proposed window locations, sight lines, enclosure performance and any listing implications. Confirm whether the proposed features are compatible with the specified assembly. Coordinate drawings, inspection expectations and owner-managed outage planning with the contractor; a thermal survey does not replace factory testing or commissioning.

LET'S BUILD SOMETHING RELIABLE — 03

Ready to talk
switchgear?

Tell us about the new equipment your project needs. Include as much or as little detail as you have today.

(951) 403-5738

CALL TO DISCUSS YOUR PROJECT

PROJECT INQUIRY

Request a quote

01 — 04

This opens your email app for you to review and send. Add any details that do not transfer, or call if you do not have an email app configured.

Request a quote